156-816.61 Questions Pass on Your First Attempt Dumps for CCMSE Certified
156-816.61 Practice Test Pdf Exam Material
NEW QUESTION 41
When configuring _________, the interface leading to the External Virtual Router should be set as the main IP Address and should be publicly routable.
- A. VLAN Trunking Interfaces
- B. Network Address Translation
- C. Anti-spoofing
- D. Virtual Systems in Bridge mode
- E. A Virtual Switch
Answer: B
NEW QUESTION 42
The provisioning and network configuration channel does NOT:
- A. Install a default Security Policy blocking all traffic
- B. Configure interface and routing information on the Gateway
- C. Create Virtual Systems and Virtual Routers on a Gateway
- D. Create a SCI Certificate for new objects and transfer the Certificate to an object on the VSX Gateway
- E. Install Administrator defined Security Policies
Answer: E
NEW QUESTION 43
Bridged Virtual Systems in a cluster monitor which of the following protocols, to fail over a bridged system?
- A. BPDU
- B. VTP
- C. MPLS
- D. OSPF
- E. STP
Answer: A
NEW QUESTION 44
The ____________ interface is configured in a VLAN environment, to allow multiple Virtual systems to share a single physical interface on a VSX Gateway.
- A. Warp
- B. Symbolic
- C. Virtual
- D. Physical
- E. Synchronization
Answer: C
NEW QUESTION 45
When configuring VSX Gateway Clustering the VSX Administrator assigns a unique
_____________ to each VSX Gateway in the cluster.
- A. Name
- B. Synchronization interval
- C. Management server
- D. Initial State (Active/Standby)
- E. Subnet Mask
Answer: A
NEW QUESTION 46
Which of the following VSX Gateway components are unique to and NOT shared by each Virtual System?
- A. Context Identification Module
- B. VSX Management Server
- C. VSX Policy Editor
- D. VSX Inspection Module
- E. Virtual Router
Answer: D
NEW QUESTION 47
When Virtual systems are deployed in Bridge mode, they use _________ to detect failures and forward traffic to another Virtual System in a cluster?
- A. MPLS
- B. PBDU
- C. OSPF
- D. VRRP
- E. STP
Answer: E
NEW QUESTION 48
Which interface of the Management Virtual System (MVS) can be compared to the External interface of a traditional Security Gateway?
- A. Dedicated management interface, typically eth0
- B. None; the External Virtual Router acts as the External interface to all Virtual Systems configured on the VSX Gateway
- C. Synchronization interface
- D. Warp interface leading from the MVS to the External Virtual Router
- E. Virtual interface leading from the MVS to the External Virtual Router
Answer: D
NEW QUESTION 49
Which of the following can function as a Management Server for a VSX Gateway?
- A. Security Management Portal
- B. Provider-1 NGX; Multi-Log Monitor
- C. VPN-1/Firewall-1 Small Office
- D. SmartCenter Server
- E. Check Point Integrity
Answer: D,E
NEW QUESTION 50
What is the netmask for each configured Warp Link?
- A. 0.0.0.0
- B. Same as the netmask of the default route of the External Virtual Router
- C. 255.255.255.0
- D. 255.255.255.255
- E. 255.255.0.0
Answer: D
NEW QUESTION 51
If you want your customer's virtual systems to give protected hosts access to and from the internet, which of the following must be configured as a Public IP address?
- A. Default Gateway IP Address of the Virtual Switch
- B. Main IP of the Management Virtual System
- C. Main IP of the Virtual Switch
- D. Default Gateway IP Address of the Management Virtual System
- E. Main IP of the Customer's Virtual System
Answer: E
NEW QUESTION 52
The ___________ is a single-bit flag that indicates that the format of MAC address information is presented in a standard form.
- A. VLAN Identifier
- B. User_Priority
- C. Tag Protocol Identifier
- D. Tag Control Information
- E. Canonical Format Indicator
Answer: E
NEW QUESTION 53
VSX clusters are defined at two levels:
- A. VSX cluster and virtual device
- B. VSX Gateway and physical device
- C. VSX cluster and physical device
- D. VSX Gateway and Virtual device
- E. VSX cluster and VSX Gateway
Answer: D
NEW QUESTION 54
When configuring Virtual Systems with overlapping IP Addressing, the Virtual Systems must:
- A. Define VLAN tags
- B. Be include in a VPN
- C. Be on the same network
- D. Perform Network Address Translation
- E. Perform in Bridge Mode
Answer: D
NEW QUESTION 55
When configuring a Warp Link, what is the IP address that appears in the topology properties of the External Virtual Router?
- A. 0.0.0.0
- B. Either the IP Address designated as the main IP for the Virtual System to which the link connects; or its Static Network Address Translation IP Address
- C. 255.255.255.255
- D. Always the IP address designated as the main IP, for the Virtual System to which the link connects
- E. Same as the IP Address of the External Virtual Router
Answer: A
NEW QUESTION 56
Which of the following interface are configured by running sysconfig, during installation of a VSX Gateway in a High Availability environment?
- A. Synchronization interface
- B. External Interface
- C. Management Interface
- D. Any Configured VLAN
- E. Dedicated Customer interface
Answer: C
NEW QUESTION 57
In a Standard VSX configuration, each Virtual System is configured with which of the following interfaces?
- A. One leading to the External Virtual Router/Switch and one for the physical interface leading to the protected network
- B. One leading to the Management Virtual System; and one leading to the External Virtual Router
- C. One leading to a router on the External network, and one for the physical interface leading to the protected network
- D. One leading to the Management Virtual System and one leading to the Internal Virtual Router/Switch
- E. One for the physical interface leading to the protected network and one leading to the management virtual system
Answer: A
NEW QUESTION 58
A Warp Link is a virtual point-to-point connection between a:
- A. Virtual System and the management interface
- B. Virtual Router and a physical interface
- C. Virtual Router and Virtual Switch
- D. Virtual Router and Virtual System
- E. Virtual System and another Virtual System
Answer: D
NEW QUESTION 59
Which of the following is the only interface configured by running sysconfig, during the installation of a VSX Gateway in a single Gateway environment?
- A. Synchronization interface
- B. External Interface
- C. Internal Virtual Route Interface
- D. Management Interface
- E. Dedicated Customer interface
Answer: D
NEW QUESTION 60
Which of the following is a Multi-Context process?
- A. gwd
- B. vsxd
- C. synd
- D. cpd
- E. psd
Answer: D
NEW QUESTION 61
The VLAN Tag increases the frame header by __________ bytes?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: C
NEW QUESTION 62
When deploying a VSX Gateway managed by a Provider-1 MDS, how many Administrators can connect in Read/Write mode to the MDS database simultaneously?
- A. No more than 25
- B. One for each CMA
- C. No more than 250
- D. Two: One can connect to the Management Virtual System database, while the other connects to the Virtual System database
- E. One
Answer: B
NEW QUESTION 63
How many Management Virtual System instances does each member of a VSX Gateway cluster run?
- A. One for each physical interface on the Gateway
- B. Two, the cluster MVS and the unique Gateway MVS
- C. One for each Virtual System configured on the Gateway
- D. Only one
- E. One for each cluster member
Answer: D
NEW QUESTION 64
......
156-816.61 [Dec-2021] Newly Released] Exam Questions For You To Pass: https://www.actualtestsit.com/CheckPoint/156-816.61-exam-prep-dumps.html