[2022] Pass Fortinet NSE6_FWF-6.4 Premium Files Test Engine pdf - Free Dumps Collection
New 2022 Realistic NSE6_FWF-6.4 Dumps Test Engine Exam Questions in here
NEW QUESTION 12
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured to authenticate locally on FortiGate
- B. A VAP configured for captive portal authentication
- C. A VAP configured for WPA2 or 3 Enterprise
- D. A VAP configured to authenticate using a radius server
Answer: C,D
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION 13
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user purchase activity
- B. Provides real-time insight into user usage stats
- C. Provides real-time insight into user movements
- D. Provides real-time insight into user online activity
Answer: B
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION 14
Which two statements about background rogue scanning are correct? (Choose two.)
- A. A dedicated radio configured for background scanning can support the connection of wireless clients
- B. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- C. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- D. Background rogue scanning requires DARRP to be enabled on the AP instance
Answer: A,C
Explanation:
To enable rogue AP scanning
NEW QUESTION 15
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- B. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- C. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- D. Indicates channels that cannot be used because of regulatory channel restrictions
Answer: A
NEW QUESTION 16
Which two statements about background rogue scanning are correct? (Choose two.)
- A. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- B. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- C. A dedicated radio configured for background scanning can support the connection of wireless clients
- D. Background rogue scanning requires DARRP to be enabled on the AP instance
Answer: B,D
NEW QUESTION 17
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Create a new FortiAP profile and change the county code settings on the profile
- B. Clone a suitable FortiAP profile and change the county code settings on the profile
- C. Configure the APs individually by overriding the settings in Managed FortiAPs
- D. Configure the controller for the correct country code for Germany
Answer: B
NEW QUESTION 18
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- B. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- C. Areas with the signal strength weaker than -68 dB are cut out of the map
- D. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
Answer: A
NEW QUESTION 19
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Site survey phase
- B. Project information phase
- C. Installation phase
- D. Hardware selection phase
Answer: A,B
NEW QUESTION 20
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- B. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
- C. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
- D. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
Answer: C
Explanation:
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
NEW QUESTION 21
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- B. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
- C. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- D. DARRP measurements can be scheduled to occur at specific times.
Answer: A,B
Explanation:
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
NEW QUESTION 22
You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?
- A. Enable Locate WiFi clients when not connected in the relevant AP profiles.
- B. Enable Radio resource provisioning on the relevant AP profiles.
- C. Enable Monitor channel utilization on the relevant AP profiles.
- D. Ensure that all allowed channels are enabled for the AP radios.
Answer: B
Explanation:
The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.
NEW QUESTION 23
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 Enterprise wireless network
- B. An X.509 certificate to authenticate the client
- C. A WPA2 or WPA3 personal wireless network
- D. An X.509 to authenticate the authentication server
Answer: A,D
NEW QUESTION 24
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- C. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
Answer: C,D
NEW QUESTION 25
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Create wireless LAN specific policies
- B. Preauthorize APs
- C. Set the wireless controller country setting
- D. Create a custom AP profile
Answer: C
NEW QUESTION 26
Which statement is correct about security profiles on FortiAP devices?
- A. Only bridge mode SSIDs can apply the security profiles
- B. Disable DTLS on FortiAP
- C. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic
- D. FortiGate performs inspection the wireless traffic
Answer: A
NEW QUESTION 27
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- B. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- C. Indicates channels that cannot be used because of regulatory channel restrictions
- D. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
Answer: A
NEW QUESTION 28
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the AP CLI, using the cw_diag ksta command
- B. On the controller CLI, using the WiFi Client monitor
- C. On the controller CLI, using the diag wireless-controller wlac -d sta command
- D. On the AP CLI, using the cw_diag -d sta command
Answer: A
NEW QUESTION 29
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA3 Enterprise
- B. WPA2 Enterprise
- C. Open, with radius MAC filtering
- D. WPA2 Personal and radius MAC filtering
Answer: B
Explanation:
Best security option is WPA2-AES.
NEW QUESTION 30
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA3 Enterprise
- B. WPA2 Personal and radius MAC filtering
- C. WPA2 Enterprise
- D. Open, with radius MAC filtering
Answer: B
NEW QUESTION 31
......
Updated Official licence for NSE6_FWF-6.4 Certified by NSE6_FWF-6.4 Dumps PDF: https://www.actualtestsit.com/Fortinet/NSE6_FWF-6.4-exam-prep-dumps.html
Newly Released NSE6_FWF-6.4 Dumps for NSE 6 Network Security Specialist Certified: https://drive.google.com/open?id=1b1YwpmsNCR3Xa9Sc4f1kcAS0gZe0_8qj