300-430 Exam Questions - Real & Updated Questions PDF
Pass Guaranteed Quiz 2021 Realistic Verified Free Cisco
Advanced Location Services
About 10% of the exam questions measure the professionals’ knowledge of the following processes:
- Implementing the components of CMX, which include presence services, analytics, as well as locate & detect;
- Troubleshooting CMX high availability;
- Implementing the location-aware services using the Facebook Wi-Fi and custom portal;
- Implementing wIPS with MSE;
- Troubleshooting the accuracy location with the help of Cisco Hyperlocation.
NEW QUESTION 34
A wireless engineer is configuring LWA using ISE. The customer is a starting company and requested the wireless users to authenticate against a directory, but LDAP is unavailable. Which solution be proposed in order to have the same security and user experience?
- A. Use the internal database of the RADIUS server.
- B. Use SAML
- C. Use Novell eDirectory
- D. Use a preshared key on the corporate WLAN
Answer: A
NEW QUESTION 35
Which component must be integrated with Cisco DNA Center to display the location of a client that isexperiencing connectivity issues?
- A. Cisco Mobility Services Engine
- B. Cisco Connected Mobile Experiences
- C. Cisco Hyperlocation Module
- D. Wireless Intrusion Prevention System
Answer: C
NEW QUESTION 36
Refer to the exhibit.
Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)
- A. WMM
- B. SIFS
- C. APSD
- D. TSPEC
- E. 802.11e
Answer: A,E
NEW QUESTION 37
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
- A. config flexconnect group BranchA-FCG vlan add 30
- B. config flexconnect BranchA-FCG vlan add 30
- C. config flexconnect BranchA-FCG vlan 30 add
- D. config flexconnect group BranchA-FCG vlan 30 add
Answer: A
Explanation:
NEW QUESTION 38
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. Static WEP + 802.1X
- B. WPA+WPA2
- C. Static WEP
- D. CKIP
- E. 802.1X
Answer: B,C
Explanation:
NEW QUESTION 39
What is the difference between PIM sparse mode and PIM dense mode?
- A. Sparse mode supports only one switch. Dense mode supports multiswitch networks.
- B. Sparse mode floods. Dense mode uses distribution trees.
- C. Sparse mode supports multiswitch networks. Dense mode supports only one switch.
- D. Sparse mode uses distribution trees. Dense mode floods.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imc-te
NEW QUESTION 40
An engineer has been hired to implement a way for users to stream video content without having issues on the wireless network. To accomplish this goal, the engineer must set up a reliable way for a Media Stream to work between Cisco FlexConnect APs. Which feature must be enabled to guarantee delivery?
- A. Multicast Direct
- B. IGMP Direct
- C. Multicast-Unicast Direct
- D. Unicast Direct
Answer: C
NEW QUESTION 41
An engineer is implementing profiling for BYOD devices using Cisco ISE. When using a distributed model, which persona must the engineer configure with the profiling service?
- A. Policy Services Node
- B. Monitor Node
- C. Device Admin Node
- D. Primary Admin Node
Answer: A
NEW QUESTION 42
An engineer must implement intrusion protection the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which Ap mode and submode must be implemented?
- A. Ap mode: local, Ap submode: none
- B. Ap mode: monitor, Ap submode: WIPS
- C. Ap mode: local, Ap submode: WIPS
- D. Ap mode: monitor, Ap submode: none
Answer: C
Explanation:
NEW QUESTION 43
A corporation has employees working from their homes. A wireless engineer must connect 1810 OEAP at remote teleworker locations. All configuration has been completed on the controller side, but the network readiness is pending. Which two configurations must be performed on the firewall to allow the AP to join the controller? (Choose two.)
- A. Allow UDP ports 5246 and UDP port 5247 on the firewall.
- B. Configure a static IP on the OEAP 1810.
- C. Allow UDP ports 12222 and 12223 on the firewall.
- D. Block UDP ports 1812 and 1813 on the firewall.
- E. Enable NAT Address on the 5520 with an Internet-routable IP address.
Answer: A,C
Explanation:
Explanation
Graphical user interface, text, application Description automatically generated
NEW QUESTION 44
An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?
- A. rate-limit
- B. mark
- C. WMM required
- D. permit-ACL
Answer: B
Explanation:
NEW QUESTION 45
Refer to the exhibit.
An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?
- A. Packet direction has no significance; it is always Any.
- B. To have the complete list of options, the CPU ACL must be created only by the CLI.
- C. It must be Inbound because traffic goes to the WLC.
- D. It must be Outbound because it is traffic that is generated from the WLC.
Answer: C
NEW QUESTION 46
An engineer is configuring multicast for wireless for an all-company video meeting on a network using EIGRP and BGP within a single domain from a single source. Which type of multicast routing should be implemented?
- A. Protocol Independent Multicast Dense Mode
- B. Multicast Source Discovery Protocol
- C. Source Specific Multicast
- D. Protocol Independent Multicast Sparse Mode
Answer: C
Explanation:
Explanation
https://mrncciew.com/2012/12/28/multicast-deployment-types/
NEW QUESTION 47
An engineer wants the wireless voice traffic class of service to be used to determine the queue order for packets received, and then have the differentiated services code point set to match when it is resent to another port on the switch. Which configuration is required in the network?
- A. WMM set to required on the WLAN
- B. Platinum QoS configured on the WLAN
- C. msl qos trust cos configured on the controller switch port
- D. msl qos trust dscp configured on the controller switch port
Answer: D
NEW QUESTION 48
A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments.
Which solution must the engineer choose?
- A. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.
- B. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0-GHz band.
- C. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
- D. Configure a second WLC to support half of the APs in the deployment.
Answer: A
Explanation:
NEW QUESTION 49
Which devices can be tracked with the Cisco Context Aware Services?
- A. Cisco certified wireless devices
- B. wireless devices
- C. wired devices
- D. wired and wireless devices
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/context-aware-software/110836-cas-faq.html
NEW QUESTION 50
An engineer has implemented 802.1x authentication on the wireless network utilizing the internal database of a RADIUS server. Some clients reported that they are unable to connect. After troubleshooting, it is found that PEAP authentication is failing. A debug showed the server is sending an Access-Reject message. Which action must be taken to resolve authentication?
- A. Disable the server certificate to be validated on the client.
- B. Update the client certificate to match the user account.
- C. Use the user password that is configured on the server.
- D. Replace the client certificates from the CA with the server certificate.
Answer: D
Explanation:
Explanation
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html
NEW QUESTION 51
A Cisco WLC has been added to the network and Cisco ISE as a network device, but authentication is failing.
Which configuration within the network device configuration should be verified?
- A. device interface credentials
- B. device ID
- C. shared secret
- D. SNMP RO community
Answer: C
Explanation:
NEW QUESTION 52
......
Cisco ENWLSI 300-430 Practice Test Questions, Cisco ENWLSI 300-430 Exam Practice Test Questions
Passing the Cisco 300-430 exam is a confirmation of one’s prowess in executing wireless networks. This encompasses QoS, location services, security, FlexConnect, and more. The test is a prerequisite for the CCNP Enterprise certification. Also, a qualified applicant is issued with the specialist-level certificate, which is also known as Cisco Certified Specialist – Enterprise Wireless Implementation. Thus, if you ace this exam along with the core one (Cisco 350-401), you will earn several certifications to show off.
Monitoring
This domain makes up about 15% of the whole content and evaluates the individuals’ understanding of the following processes:
- Utilizing reports on Cisco DNA Center and PI;
- Managing rogues and alarms;
- Managing RF interferers;
- Troubleshooting the client’s connectivity.
Get to the Top with 300-430 Practice Exam Questions: https://www.actualtestsit.com/Cisco/300-430-exam-prep-dumps.html
Free CCNP Enterprise 300-430 Ultimate Study Guide: https://drive.google.com/open?id=1XPjuaKZPg9bA4H70ZlLxVsxPzZzF5Rs4