JN0-362 Practice Exam Tests Latest Updated on Sep-2021
Pass JN0-362 Exam in First Attempt Guaranteed Dumps!
NEW QUESTION 17
What happens when a packet matches a static route with the next hop parameter set to reject?
- A. The packet is forwarded and the packet is marked as rejected in the header
- B. An ICMP message is sent to the source and the packet is dropped
- C. The system silently drops the packet
- D. An ICMP message is sent to the source and the packet is forwarded
Answer: B
NEW QUESTION 18
Click the Exhibit button.
You must create a static route on Router-A to the 10.10.5.0/24 network using 10.10.3.2 as the next hop.
Referring to the exhibit, which configuration accomplishes this task?
- A.

- B.

- C.

- D.

Answer: C
NEW QUESTION 19
Click the Exhibit button.
Which type of route is shown in the exhibit?
- A. kernel
- B. generate
- C. aggregate
- D. static
Answer: B
NEW QUESTION 20
Which MPLS feature works with Constrained Shortest Path First (CSPF) to protect against the primary and secondary paths using the same link?
- A. fate-sharing
- B. explicit null configuration
- C. LSP metrics
- D. policy control over LSP selection
Answer: A
NEW QUESTION 21
Click the Exhibit button. In the exhibit, all routers are sending routes to Router B
Which routes will be advertised from Router B to Router D?
- A. BGP routes learned from Routers A and C only
- B. BGP routes learned from Router E only
- C. BGP routes learned from Router A only
- D. BGP routes learned from Routers A, C and E only
Answer: D
NEW QUESTION 22
Click the Exhibit.
You are planning the addition of a new EX3400 Series device to the network (EX-3400-7) to service MSTI-1 and MSTI-2.
Referring to the exhibit, which requirement must be met on EX-3400-7 for the MSTP instances to become fully operational and resilient?
- A. The MSTP revision-level must be incremented.
- B. The bridge-priority must match EX-3400-5 and EX-3400-6.
- C. The CIST must be extended to EX-3400-7.
- D. The MSTP configuration-name must be the same.
Answer: D
NEW QUESTION 23
An IS-IS TLV includes which two attributes? (Choose two.)
- A. Value
- B. Topology
- C. Length
- D. Vector
Answer: A,C
NEW QUESTION 24
Which configuration can be applied to ensure that no more than 600 MAC addresses are learned by a virtual switch?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: B
NEW QUESTION 25
Click the Exhibit button. Given the OSPF topology shown in the exhibit, how many unique link-state databases are present in the network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 26
You have been asked to identify what the contributing routes are for route 204.7.15/21.Which command will show this information?
- A. show route 204.7.15/21
- B. show route 204.7.15/21 detail
- C. show route 204.7.15/21 extended
- D. show route 204.7.15/21 exact summary
Answer: B
NEW QUESTION 27
Click the exhibit.
Customer 1 has experienced some hardware failures that erroneously transitioned some links into a forwarding state, as shown in the exhibit.
In this scenario, which STP feature set would solve this problem?
- A. Loop protection
- B. Root protection
- C. BPDU protection
- D. MAC movement protection
Answer: A
NEW QUESTION 28
You notice that a route from internal BGP peer 192.168.1.1 is missing from the local route table.Which two commands would be used to help identify the source of the problem? (Choose two.)
- A. show route receive-protocol bgp 192.168.1.1
- B. show route bgp
- C. show route protocol bgp hidden
- D. show route advertising-protocol bgp 192.168.1.1
Answer: A,C
NEW QUESTION 29
Which two values are used by an RSTP bridge to remove stale BPDU information? (Choose two.)
- A. Forwarding Delay
- B. Hello Time
- C. Message Age
- D. Max Age
Answer: C,D
NEW QUESTION 30
Click the Exhibit button.
You have configured IPv6 over IPv4 tunneling, as shown in the exhibit. However, hosts connected to network
2001:0:0:1::0/64 cannot communicate with hosts on network 2001:0:0:2::0/64. The router R2 has a similar configuration as the R1 router.
How would you solve this problem?
- A. Configure an IGP across the tunnel interfaces
- B. Configure the next hop of the inet6.0 static route to point to the IPv4 address of the remote router
- C. Configure an IPv6 address on the tunnel interfaces
- D. Configure the next hop of the inet6.0 static route to point to the physical interface between the routers
Answer: B
NEW QUESTION 31
Click the Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The LSP is protected with fast reroute.
- B. The last node in the path will not pop the MPLS label.
- C. The LSP is protected with link protection.
- D. The last node in the path will pop the MPLS label.
Answer: C,D
NEW QUESTION 32
By default, the Junos OS advertises which address(es) in LDP forwarding equivalency class (FEC) messages?
- A. loopback address
- B. all router addresses
- C. primary transit interface address
- D. all transit interfaces
Answer: A
NEW QUESTION 33
Referring to the exhibit, which firewall filter action(s) will be applied to incoming frames to ge-1/0/3?
- A. Frames will be counted initially by filterB and then counted by filterA.
- B. Frames will be counted by filterA only.
- C. Frames will be counted by filterB only.
- D. Frames will be counted initially by filterA and then counted by filterB.
Answer: D
NEW QUESTION 34
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. R3 will not participate in the election process
- B. R4 will be the designated router
- C. R2 will be the designated router
- D. R1 will not participate in the election process
Answer: A
NEW QUESTION 35
In a stateless IPv6 auto-configuration scenario, what is the host's IPv6 address if the interface's MAC address is 12:34:ab:cd:ef:56?
- A. fe8::1234:abff:fecd:ef56/64
- B. fec0::1234:abff:fecd:ef56/64
- C. fe80::1234:abcd:ef56/64
- D. fe80::1234:abff:fecd:ef56/64
Answer: C
NEW QUESTION 36
Your customer complains that their Layer 3 VPN is not passing traffic from one site to another. You assigned that customer to VPN-A. Which command on the PE router will confirm the presence of customer routes?
- A. show route VPN-A table bgp.l2vpn.0
- B. show route VPN-A
- C. show route table VPN-A.inet.0
- D. show route table inet.3 VPN-A
Answer: C
NEW QUESTION 37
What are two valid next-hop types that would be configured for a static route? (Choose two.)
- A. An IP address
- B. A MAC address
- C. An igress interface name
- D. An egress interface name
Answer: A,D
NEW QUESTION 38
Router A receives two similar route advertisements from different BGP peers.What would cause a route to be selected in this scenario?
- A. having a lower local preference
- B. learning a route from a peer with a higher peer ID
- C. having a lower MED value
- D. learning a route from a peer with a higher IGP metric
Answer: C
NEW QUESTION 39
......
JNCIS-SP Free Certification Exam Material from ActualTestsIT with 67 Questions: https://www.actualtestsit.com/Juniper/JN0-362-exam-prep-dumps.html