Updated Dec 21, 2021 Certification Exam 4A0-C02 Dumps - Practice Test Questions [Q68-Q88]

Share

Updated Dec 21, 2021  Certification Exam 4A0-C02 Dumps - Practice Test Questions

Updated Verified 4A0-C02 dumps Q&As - Pass Guarantee or Full Refund

NEW QUESTION 68
Where are VPN-IPv4 addresses used in a VPRN?

  • A. In the routing updates exchanged from PE to PE
  • B. In the routing updates exchanged from CE to PE
  • C. In customer packets as they traverse the provider core
  • D. In the routing updates exchanged from P to PE
  • E. In all route tables of the VPRN control plane

Answer: A

 

NEW QUESTION 69
For the inter-AS model B VPRN, which of the following is the correct BGP configuration on ASBR1?

  • A. Option A
  • B. Option B
  • C. Option D
  • D. Option C

Answer: D

 

NEW QUESTION 70
Click the exhibit.

A Carrier Supporting Carrier (CSC) VPRN is configured for a customer carrier who is a BGP/MPLS service provider. Which route is present in PE1's global routing table?

  • A. 192.168.10.1
  • B. 10.10.10.6
  • C. 10.10.10.1
  • D. 192.168.20.1

Answer: B

 

NEW QUESTION 71
Which of the following about inter-AS model C VPRNs is FALSE?

  • A. Within each AS, MP-iBGP sessions are established to exchange VPN-IPv4 prefixes between the PE routers.
  • B. PE routers in different ASs exchange VPRN routing information directly over MP-eBGP.
  • C. ASBRs exchange the system addresses of PE routers as VPN-IPv4 routes over MP-eBGP.
  • D. Within each AS, the ASBR advertises the system addresses of remote PE routers as labeled IPv4 routes.

Answer: C

 

NEW QUESTION 72
What class of attribute is Originator_ID?

  • A. Optional transitive.
  • B. Optional non-transitive.
  • C. Well-known mandatory.
  • D. Well-known discretionary.

Answer: B

 

NEW QUESTION 73
Router R1 is a route reflector with clients R2, R5 and R6. Prefixes advertised by router R5 have a local preference of 200. Router R3 advertises the prefix 192.168.1.0/27 to routers R5 and R6.
Assuming that none of the routers in AS 65540 is configured with "advertise-external", what is the expected output of "show router bgp routes" on router R2?

  • A. Option A
  • B. Option D
  • C. Option C
  • D. Option B

Answer: A

 

NEW QUESTION 74
Which of the following best describes the output?

  • A. The AS-Path is not present because VPN-IPv4 routes do not propagate the IPv4 AS-Path BGP attribute.
  • B. The AS-Path is not present because a policy is configured on CE1 to set it to null.
  • C. The AS-Path is not present because a policy is configured on PE2 to set it to null.
  • D. The AS-Path is not present because a policy is configured on PE1 to set it to null.

Answer: D

 

NEW QUESTION 75
On a PE router, the VRF table for VPRN 10 contains: one local route, two BGP routes learned from a local CE. and three tunneled routes learned from a remote site. If we execute the command "configure service vprn 10 maximum-routes 2 log-only" on this PE router, how many routes are expected to be in the VRF?

  • A. Six routes: the local route, the two BGP routes learned from the local CE, and three tunneled routes.
  • B. Three routes: the local route and two tunneled routes.
  • C. Two routes: the local route and one BGP route learned from the local CE.
  • D. Five routes: the local route, the two BGP routes learned from the local CE, and two tunneled routes.
  • E. Two routes: the local route and one tunneled route.

Answer: A

 

NEW QUESTION 76
Routers RR1 and RR2 are configured as route reflectors. For the inter-AS model C VPRN, which of the following about the VPN-IPv4 route advertisement is FALSE?

  • A. RR2 advertises the VPN-IPv4 route update of 192.1.1.0/27 to PE2
  • B. RR2 advertises the VPN-IPv4 route update of 192.2.1.0/27 to RR1
  • C. RR1 advertises the VPN-IPv4 route update of 192.1.1.0/27 to RR2
  • D. PE1 advertises the VPN-IPv4 route update of 192.1.1.0/27 to RR1 and ASBRL

Answer: D

 

NEW QUESTION 77
For the Inter-AS model B VPRN, which of the following about the inter-as-label output on ASBR1 is TRUE?

  • A. ASBR1 includes label 131068 in the route update sent to PEL
  • B. ASBR1 includes label 131068 in the route update sent to ASBR2.
  • C. ASBR1 includes label 131069 in the route update sent to ASBR2.
  • D. ASBR1 includes labels 131068 and 131069 in the route update sent to ASBR2.

Answer: B

 

NEW QUESTION 78
For the Carrier Supporting Carrier (CSC) VPRN, which routes are advertised between CSC-CE1 andCSC-PE1?

  • A. VPN-IPv4 routes for all PE system addresses in AS 5000
  • B. BGP labeled IPv4 routes for all PE system addresses in AS 1000
  • C. VPN-IPv4 routes for all PE system addresses in AS 1000
  • D. BGP labeled IPv4 routes for all PE system addresses in AS 5000

Answer: D

 

NEW QUESTION 79
What is the name of the feature supported on the Alcatel-Lucent 7750 SR that prevents MAC explosion in large VPLS deployments?

  • A. M-VPLS
  • B. PBB
  • C. H-VPLS
  • D. MC-EP

Answer: B

 

NEW QUESTION 80
With hierarchical scheduling, up to ___________ tiers are supported on the Alcatel-Lucent 7750 SR.

  • A. 0
  • B. 1
  • C. 2
  • D. 3
  • E. 4

Answer: C

 

NEW QUESTION 81
Without_______, a customer's high priority traffic can be dropped before its low priority traffic.

  • A. least cost routing
  • B. prioritization of traffic flows
  • C. packet filtering
  • D. OAM functionality
  • E. separation between the data plane and the control plane

Answer: B

 

NEW QUESTION 82
Which of the following about BGP Site of Origin (SoO) is FALSE?

  • A. The SoO attribute can be used as matching criteria when redistributing routes from the CE to the PE
  • B. The SoO attribute can be used to prevent loops from a single site with multiple CE-PE connections.
  • C. The SoO attribute can be used to uniquely identify the site from which a PE learns routes.
  • D. Before a PE redistributes a VPN-IPv4 route, it can assign an SoO attribute to the route.

Answer: A

 

NEW QUESTION 83
Which of the following statements BEST describes an MBS parameter?

  • A. It specifies the maximum rate at which a queue can be serviced.
  • B. It specifies the maximum depth of a queue beyond which packets will be dropped.
  • C. It specifies the peak bandwidth that can be attained by the incoming traffic.
  • D. It specifies the threshold beyond which only in-profile packets will be queued.
  • E. It specifies the portion of a queue that is taken from the reserved buffer pool.

Answer: B

 

NEW QUESTION 84
Click the exhibit.

Considering that both routers C and D are advertising the eBGP learned prefix 10.5.0.0/16 into ISP X, which of the following best describes the route advertisement within ISP X?

  • A. Router C sends the update to routers D, E and F.
  • B. Router C sends the update to routers A, B, D, E and F.
  • C. Router C sends the update to routers A, B, E and F.
  • D. Router C sends the update to routers E and F only.

Answer: B

 

NEW QUESTION 85
What kind of BGP attribute is the Local Preference?

  • A. Optional transitive attribute.
  • B. Well-known discretionary attribute.
  • C. Well-known mandatory attribute.
  • D. Optional non-transitive attribute.

Answer: B

 

NEW QUESTION 86
If a packet is marked on a SAP-ingress, it will be remarked at the first network egress point (if remarking is enabled in the network egress policy).

  • A. TRUE
  • B. FALSE

Answer: B

 

NEW QUESTION 87
A router has just learned the 10th MAC address while the FDB size is also set to 10. What is the likely outcome?

  • A. The frame is forwarded and MAC learning is automatically disabled.
  • B. The frame is discarded if the destination is unknown.
  • C. The frame is dropped.
  • D. More information is required to determine the fate of this new frame.
  • E. The frame is always flooded

Answer: A

 

NEW QUESTION 88
......


Nokia 4A0-C02 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Understand full, hub and spoke, and extranet VPRN topologies
  • Plan and implement a basic BGP network using Nokia SR OS
Topic 2
  • Implement loop prevention in VPRN using multiple techniques
  • Describe the use of active and standby pseudowires to achieve redundancy instead of STP
Topic 3
  • Describe the operation of advanced VPRN topologies and services
  • Verify and troubleshoot the results of the policies configurations
Topic 4
  • Understand the operation of Inter-AS VPRN model A, model B and model C
  • Describe the effect of using advertise-external feature on BGP route propagation
Topic 5
  • Explain the key scalability concerns in large VPLS deployments
  • Manage a VPLS infrastructure, and troubleshoot and repair a misconfigured VPLS
Topic 6
  • Describe the basic Internet Architecture and related elements
  • Scale iBGP by deploying confederations or route reflections
Topic 7
  • Successfully configure, monitor and troubleshoot a network of multiple BGP peers
  • Implement BGP policies in an Nokia environment
Topic 8
  • Describe the operation of providing Internet access using various techniques
  • Demonstrate a sound understanding of BGP mechanics and the role of BGP attributes
Topic 9
  • Define management VPLS (M-VPLS) and how it can be used with STP to provide redundancy and load balancing
  • Explain BGP add-paths feature
Topic 10
  • Implement loop control mechanisms such as rapid spanning tree in a VPLS environment
  • Describe the role of BGP in service provider networks
Topic 11
  • Explain the concept of a hierarchical VPLS and its benefits for large VPLS networks
  • Describe the advantages of a VPLS and configure a VPLS service
Topic 12
  • Describe the operation of the basic VPRN architecture
  • Explain the interaction between BGP and interior gatewayprotocol (IGP)
Topic 13
  • Configure and verify BGP advertise-external, add-paths, and FRR on Nokia SR
  • Describe the operation of BGP fast reroute

 

Exam Engine for 4A0-C02 Exam Free Demo & 365 Day Updates: https://www.actualtestsit.com/Nokia/4A0-C02-exam-prep-dumps.html